Especially the grounds… David F. Risch Managing Director Great Benefits USA 401-419-4650 - Direct Line [https://docs.google.com/uc?export=download&id=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN&revid=0B9uSW32EcB8tZGxlWW1OMlJ6MXU0bmVaaFByQmlSVDMrOWNVPQ] www.greatbenefitsusa.com<http://secure-web.cisco.com/1MKVfvkygVP51lGc2yziNIFDb1f7QyqlMMC0Ws5XFwrh5Z29yk8V9-H-BpWPdc4H-KLGYNJ8xByn00jzsd-2Ha4CJqta-Oi4SR3zv-ilvvFQgk2r1dTGx91oAnCtrCtWX3971epXdF8ZQx6oCN2aVAz4G2C1e3AFPPZNeJDlLweF62zGZQ07PHpl8HRpYdWC2krf8nk8VytnngLfzo-HMlRvyliYY5btbWmG2ov1MoH8MQ_Pu-H9km1SSOFq4VsiFRn62vshzHwa2jYYWiHfn79noxm3wQLeI3kjNdWmHg705FbzWALYFp_QCz0Eu9z0S/http%3A%2F%2Fwww.greatbenefitsusa.com%2F>
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future. Great Benefits USA puts the security of the client at a high priority. Therefore, we have put efforts into ensuring that the message is error and virus-free. Unfortunately, full security of the email cannot be ensured as, despite our efforts, the data included in emails could be infected, intercepted, or corrupted. Therefore, the recipient should check the email for threats with proper software, as the sender does not accept liability for any damage inflicted by viewing the content of this email. From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Doug Mountjoy via CnC-List Sent: Friday, July 31, 2020 10:53 AM To: cnc-list@cnc-list.com; CnC CnC discussion list <CnC-List@cnc-list.com> Cc: Doug Mountjoy <svrebeccal...@gmail.com> Subject: Re: Stus-List Engine starting issue Sounds to me you might have some corrosion in the starter circuit. Check all the battery, ignition, and starter wires for tight and clean connections. Do you hear a click when you try starting without glow plugs? Doug Mountjoy sv Rebecca Leah C&C Landfall 39 Port Orchard yacht club -------- Original message -------- From: David Knecht via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Date: 7/31/20 07:38 (GMT-08:00) To: CnC CnC discussion list <CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com>> Cc: David Knecht <davidakne...@gmail.com<mailto:davidakne...@gmail.com>> Subject: Stus-List Engine starting issue Twice in the last week, I have noticed an issue that might be a prelude to a greater problem. Normally, I start the engine by turning on the key, hitting the glow plug button for 30 seconds and then hitting the start button. Never been a problem there. Both times that this has happened, the engine was already warm and I just turned the key on, hit the start button and got no response. Tried again a few seconds later and it started up fine both times. Is it possible that something needs a few seconds to power up after turning the key on (solenoid?)? I don’t remember this being an issue in the past, but it is not often I start the engine by just turning the key and pushing start. My start battery is a 10 year old AGM and has had no trouble cranking the engine in general, even after warming the glow plugs for 45 seconds. Thanks- Dave David Knecht S/V Aries 1990 C&C 34+ New London, CT [X]
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
