Hi Charles there a nice cnc 44 on yacht world
For 109 000

On Tue, Jul 21, 2020 at 11:28 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:

> You could make a long stroke ram moving a 4 part block and tackle
> “backwards”, i.e. 1 foot of ram = 4 feet of line, but then it would be
> pumping vs. cranking unless you got a trim pump from an I/O to do it with a
> button.
>
> J
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Charlie
> Nelson via CnC-List
> *Sent:* Tuesday, July 21, 2020 10:59 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* cenel...@aol.com
> *Subject:* [EXTERNAL] Re: Stus-List New-guy C&C 40 Shopping questions
>
>
>
> I am hardly an expert on 'purchase' regarding hydraulics but the issue
> with a board might be that it has to be physically moved up 3-4 feet--i.e.
> its more than just the tension applied.
>
>
>
> Charlie Nelson
>
> 36 XL/kcb Water Phantom
>
> supporting this list with your contributions.  Each and every one is
> greatly appreciated.  If you want to support the list - use PayPal to send
> contribution --  https://www.paypal.me/stumurray
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> --
Joel Delamirande
*www.jdroofing.ca <http://www.jdroofing.ca>*
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to