I have a decal on my gauge with both psi and pounds shown. I have decals
for different size cylinders. My gauge is difficult to read, but a mark on
the gauge at the maximum allowable force is all I need to make sure I don't
go over.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR

On Thu, Jun 11, 2020 at 5:59 AM Dennis C. via CnC-List <
cnc-list@cnc-list.com> wrote:

> We had this discussion many years ago on this list.
>
> I think I recall that this is tension (in pounds) on the wire/rod.  I
> think the reading on a hydraulic back stay adjuster gauge is pressure (in
> psi) on the piston.  If so, they are not the same.
>
> I think you have to convert the psi reading to tension based on the area
> of the piston in YOUR adjuster.  For instance, if your piston is 1 1/4
> inches in diameter, you would have an area of 1.23 sq inches.  So 1000 psi
> on the piston would exert 1230 pounds tension on the back stay.
>
> I could be entirely wrong.  Can someone verify this?
>
> Touche's hydraulic back stay gauge is too opaque to read.  We adjust to
> sail shape and have a batten with green/yellow/ red/black tape marks for
> repeating settings.
>
>   --
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
> On Wed, Jun 10, 2020 at 9:39 PM david--- via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I am not sure this picture will be small enough for the list. When I
>> bought my 35-2, I found a memo from C&C in the nav  table saying the
>> maximum back stay tension is 2050 pounds
>>
>>
>>
>> David Kelly
>> Baraka C&C 35-2
>> Noroton, CT
>>
>>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!6Irh5PTYZakQtXauMhWGthgv_2yaQcpNMdPGN5xFMrPqOoP--enSG3KOMPbqT98QdtE$
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to