James Bibb here in Alaska…I have the R version and find all of this information very helpful. First time I’ve seen the order information.
I’m always looking for detailed construction drawings for this model as I try and either diagram or look at renovation options. Is there more resources for detailed plan and section…sailplane drawings for this model out there somewhere? James Bibb SV Darwins Folly 34/36R > On Nov 7, 2019, at 11:14 AM, Ken Heaton via CnC-List <cnc-list@cnc-list.com> > wrote: > > The difference between + and XL versions was in the optional (read more > expensive) hull layup on the XL (which was the same layup used on the R), > which used a bit more Kevlar Hybrid Fabric and used Aircraft Grade > Pre-Impregnated Balsa Core in place of Marine Grade Balsa core, so was > lighter and perhaps a bit stronger. It was just another option on the order > sheet. > > Most XLs were also ordered with the taller tapered mast with three spreaders > so that is the usual way to tell them apart. The order sheet gives the > details if you have a copy of the original. Look for the 'R' Racing layup > option to see if it is ticked off. If you are lucky enough to have the Build > File all the details are in there. > > In one C&C brochure for the 36 Series from 1994/1995 they say the XL mean > 'eXtra Light'. The 36 Series is what they called the 34/36 in marketing > materials after C&C's restructuring in 1993. The Brochure page is here: > http://www.cncphotoalbum.com/brochures/36foot/36xlb1pg02.htm > <http://www.cncphotoalbum.com/brochures/36foot/36xlb1pg02.htm> > > Skip to the last page of the Brochure to compare the Standard Equipment lists > for the different versions. > > Ken H. > > On Thu, 7 Nov 2019 at 15:21, CHARLES SCHEAFFER via CnC-List > <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: > I've done some research on this and found the 34/36 could be ordered with any > combination. Some plus models were ordered with short rigs and some with two > spreader rigs and some with three spreader rigs. There were several keels > offered, 7' 4", 5' 3" wing, and later a centerboard version. In '96, Mars > Metals cast a 6' 3" keel for the boat. Last I heard Mars lost the molds for > the wing keel but still have the molds for the 6' 3" and 7' 4" models. The > difference between Plus and XL remains a mystery to me as I've seen several > versions of each. > > Chuck Scheaffer, Resolute, 1989 C&C 34R, Pasadena, Md > > > > > > On November 7, 2019 at 1:55 PM T Sutton via CnC-List <cnc-list@cnc-list.com > > <mailto:cnc-list@cnc-list.com>> wrote: > > > > > > As far as I know a 34/36 XL will have triple spreaders and running back and > > check stays. The 34+ will have double spreaders and no running backs or > > check stays. > > > > Tom S > > > > -----Original Message----- > > From: Tom Vaughan via CnC-List > > Sent: Thursday, November 7, 2019 1:34 PM > > To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> > > Cc: Tom Vaughan > > Subject: Stus-List C&C 34+ DK & C&C 35/36 XL > > > > I have a 1990 C&C 34 + DK. PHRF LE say that the Rigging is that of a 35/36 > > XL & not of the 34+. Thus I was given the much lower PHRF for the faster > > Boat. Did C&C put the 35/36 XL rigging on 34+ boats? > > Tom Vaughan, Summer Love II, C&C 34+ DK, Buffalo, NY/ tomvaug...@yahoo.com > > <mailto:tomvaug...@yahoo.com> > > > > Sent from my iPhone > > > > _______________________________________________ > > > > Thanks everyone for supporting this list with your contributions. Each and > > every one is greatly appreciated. If you want to support the list - use > > PayPal to send contribution -- https://www.paypal.me/stumurray > > <https://www.paypal.me/stumurray> > > > > > > _______________________________________________ > > > > Thanks everyone for supporting this list with your contributions. Each and > > every one is greatly appreciated. If you want to support the list - use > > PayPal to send contribution -- https://www.paypal.me/stumurray > > <https://www.paypal.me/stumurray> > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > <https://www.paypal.me/stumurray> > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
