Another hole saw trick to increase the size of a hole is to find the hole saw that matches the size of the existing hole and use that to drill a plug out of scrap wood. Fit the plug onto the pilot drill of the larger hole saw and use that as a pilot to center the larger one. Works like a champ keeping the saw centered.
Chuck S > On October 30, 2019 at 8:44 PM Neil Andersen via CnC-List > <cnc-list@cnc-list.com> wrote: > > With many hole saws you can stack blades/bits. The outer is the size you > need, the inner the size of the old hole. > > Neil > 1982 C&C 32 > > Neil Andersen > 20691 Jamieson Rd > Rock Hall, MD 21661 > > > --------------------------------------------- > From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Bradley > Lumgair via CnC-List <cnc-list@cnc-list.com> > Sent: Wednesday, October 30, 2019 6:32 PM > To: C&c Stus List > Cc: Bradley Lumgair > Subject: Stus-List Advice on replacing 33-2 BandG 32mm transducer with > Airmar 52mm transducer > > Doug > I replaced the original with a a Raymarine (airmar) about 5 yrs ago. Just > centered the holesaw in the tapered hole and let loose, no problem. The hull > was NOT cored just forward of the keel on our full keeled 33-2 . About 3/4 > inch of solid fibreglass. Installed with a lick of black Lifecaulk, no leaks. > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
