Good call Neil. I forgot that that was even possible. Josh
On Wed, Oct 30, 2019, 8:45 PM Neil Andersen via CnC-List < cnc-list@cnc-list.com> wrote: > With many hole saws you can stack blades/bits. The outer is the size you > need, the inner the size of the old hole. > > Neil > 1982 C&C 32 > > Neil Andersen > 20691 Jamieson Rd > Rock Hall, MD 21661 > > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Bradley > Lumgair via CnC-List <cnc-list@cnc-list.com> > *Sent:* Wednesday, October 30, 2019 6:32 PM > *To:* C&c Stus List > *Cc:* Bradley Lumgair > *Subject:* Stus-List Advice on replacing 33-2 BandG 32mm transducer with > Airmar 52mm transducer > > Doug > I replaced the original with a a Raymarine (airmar) about 5 yrs ago. Just > centered the holesaw in the tapered hole and let loose, no problem. The > hull was NOT cored just forward of the keel on our full keeled 33-2 . About > 3/4 inch of solid fibreglass. Installed with a lick of black Lifecaulk, no > leaks. > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
