Dan, three years ago I had my 33 mk II rebuilt by Compétition composite in ontario http://cci.one/site/marine/foils-a-z/cc/?doing_wp_cron=1555635569.6945309638977050781250
They did a fantastique job. CNC machined high density corecell core, vaccum bagged with epoxy resin. The shape and symetry is perfect. It feels awesome. They uses the original planform. I sent them my delaminated wet rudder, they wanted to measure it to be sure of the hull clearance, they inspect the rudder post and it was perfect so they used it for the rebuilt. If i remember it was a bit cheaper than a new one from Southshore and the quality seemed superior. Who knows. If they don't have it for the 44, you can get the planform from the original drawings. ( available from a museum in Ontario, don't remember the exact name but other listers will) Shipping was expensive, I had to have a very sturdy wood cradle made to ship the rudder and of them to reuse. When I received it I was glad to have made it bomproof because the box was damaged but not the precious new rudder. Good luck! Bruno Lachance Bécassine 33mkII New Richmond, Qc Obtenez Outlook pour iOS<https://aka.ms/o0ukef> ________________________________ De : CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> de la part de Dan via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Envoyé : Thursday, April 18, 2019 3:38:02 PM À : cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc : Dan Objet : Stus-List Replacing a CnC 44 Rudder Has any C&C44 owners on the list replaced their rudder, and if so, where did you have the work done? - The price is dramatically reduced if they have an existing mold to work with. Dan Cormier Breakaweigh C&C44 Halifax, NS
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
