David, I had a Garhauer triple with cam on my 35/3. Traveller is on the companionway. I used a 7/16 sheet and don't recall any trouble, but the cam block was on the bottom and the line could not fall out. Could the sheet be catching on something or someone or is the sheet is too small?
Joel On Mon, Jun 4, 2018 at 9:30 AM, David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I had a problem for the last two seasons with my main sheet handling > system. I have a double ended system, with a 5:1 on the traveler with a > Garhauet triple block with cam cleat then led forward to the mast and back > to a winch on the cabin roof. The advantage is that I can quickly adjust > in lighter airs with the traveller system and winch the main in heavy airs > at the other end. It works fine except I had a problem that many times > (not always) when I jibe, the main sheet pulled out of the cleat on the > triple and the line ran out until it hit the stop knot. It happens so fast > that I really could not see why this was causing this. It would happen > even when the traveller car was stopped on both sides and there was loss of > tension on the sheet prior to the jibe. The only thing I could see that > might be an issue is that the block has the cam cleat on the underside so > perhaps it was “falling out” of the cam during the jibe. We tried to make > sure the sheet was not dangling down into the cabin, but it still seemed to > happen. As a last resort, I ordered a triple from Garhauer with the cam on > the upper side and installed it recently. I was in a race yesterday in > heavy air, and it happened again with the new version of the block and > cleat. Does anyone have any insights on what is causing this and how to > stop it? Thanks- Dave > > Aries > 1990 C&C 34+ > New London, CT > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > > -- Joel 301 541 8551
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
