Neil,

Those are great informative videos but unfortunately they don’t address the 
problem that both I and Chuck had/have. In both of those videos the top plate 
can be unbolted and lifted of, allowing access to the cut-outf. On our boats, 
that top plate is welded to, in my case, a massive single chainplate oriented 
in a fore-and-aft plane. The only way to get under that plate in order to fill 
the cut-out is to remove/lift the entire chainplate.

And the most egregious error is that they didn’t use butyl!  ;-)

Cheers,
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit <http://roninrebuild.blogspot.com/>

> On May 5, 2018, at 10:22 AM, Neil E. Andersen via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Chuck and fellow listers,
>  
> Here is a YouTube video showing the re-bedding chain plates on an Island 
> Packet that is quite detailed and shows some good information that is not 
> specific to Island Packet.  https://www.youtube.com/watch?v=4L-hf5607AI&t=6s 
> <https://www.youtube.com/watch?v=4L-hf5607AI&t=6s>
>  
> Here is on with a C&C: https://www.youtube.com/watch?v=Cvpq_AA85N4 
> <https://www.youtube.com/watch?v=Cvpq_AA85N4> (starts around a minute in).
>  
> Sincerely,
> Neil
> 1982 C&C 32 FoxFire
> Rock Hall, MD
>  
> Full disclosure, I am now a Broker for S&J Yachts in Rock Hall, MD
>  
> Office: 410 639-2777 or 410 571-3605
> Cell: 484-354-8800
> Email: n...@sjyachts.com <mailto:n...@sjyachts.com>
> Website: www.sjyachts.com <http://www.sjyachts.com/>
> 
> From: CnC-List <cnc-list-boun...@cnc-list.com 
> <mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Chuck S via CnC-List
> Sent: Friday, May 4, 2018 11:12 PM
> To: CNC boat owners, cnc-list <cnc-list@cnc-list.com 
> <mailto:cnc-list@cnc-list.com>>
> Cc: Chuck S <cscheaf...@comcast.net <mailto:cscheaf...@comcast.net>>
> Subject: Stus-List Sealing Chainplates
>  
> What's the best way to seal leaky chainplates at the deck.  The boats built 
> after 1988 have a welded flange that makes it hard to get caulk inside the 
> joint without removing the whole assembly.
>  
>  
> Chuck
> Resolute
> 1990 C&C 34R
> Broad Creek, Magothy River, Md
> _______________________________________________
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray 
> <https://www.paypal.me/stumurray>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to