On mine, the front parts have screws going through the headliner in the head, above the hanging locker, and above the bulkhead going into the main cabin. Rach section has two screws and in mine, they have little silver plugs covering the holes. In the main cabin, the screws go through the interior grab rail and are covered by teak plugs. Again, two screws at each mount point.
-----Original Message----- From: Chris Hobson [mailto:chrish...@yahoo.com] Sent: Sunday, April 15, 2018 12:57 PM To: cnc-list@cnc-list.com Subject: Stus-List Cabin top grab-rail removal/refasten 30' MK1 With the cabin headliner on my 1980 30’ MK1 being one solid piece, there are no accessible bolts for the cabin top grab rail. I’m sure I could figure out how to remove the grab rail but without a bolt to hold the underside to tighten it back up I’m a bit lost. Does anyone know how how I’d refasten one of these to the cabin top? I suppose one way to find out would be to cross my fingers remove the grab rails, and have look around. Thanks Chris _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
