The handrails are screwed or bolted into the interior cabin handrails,
if yours is like mine. Take the plugs out
and you will have access. There are a few areas where there isn't a
handrail, and you should find plugs in the
fiberglass (either plastic or metal). If they are screwed together, I'd
say probably want to bolt them back together...
I don't have a huge amount of faith in screws for something that important.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30
Armdale Y.C.
On 4/15/2018 1:56 PM, Chris Hobson via CnC-List wrote:
With the cabin headliner on my 1980 30’ MK1 being one solid piece, there are no
accessible bolts for the cabin top grab rail. I’m sure I could figure out how
to remove the grab rail but without a bolt to hold the underside to tighten it
back up I’m a bit lost. Does anyone know how how I’d refasten one of these to
the cabin top?
I suppose one way to find out would be to cross my fingers remove the grab
rails, and have look around.
Thanks
Chris
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray