Dave,
I spent some time web surfing and found that there are Marine extensions for UL 2304. Someone contacted Kidde to see if their units met the standard and struck out. I no longer have access to UL standards so I can’t check to see what they are. My guess is that if you really want (and have to) comply with the standard, you’ll have to pony up for the marine unit. Just an aside, the business I used to own was certified to apply a UL 508 (industrial controls) label on equipment we our shop built. Periodically, we were inspected and one time were told that the ground bar we used did not cut the mustard because it “was not in our procedure”. If you go look in the circuit breaker box in your house you’ll see a similar ground bar. For something in the order of $2,000, UL would “investigate” it and “add” to our procedure. Go figure if it’s really worth spending the extra bucks on a UL “Marine” CO detector. My CO detector is due for replacement. I am having a hard time spending over $100 for a $25 UNIT. Regards, Ron Ron Ricci S/V Patriot C&C 37+ Bristol, RI <mailto:ron.ri...@1968.usna.com> ron.ri...@1968.usna.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Castor via CnC-List Sent: Monday, November 27, 2017 3:55 PM To: cnc-list@cnc-list.com Cc: David Castor Subject: Re: Stus-List CO detector choices UL 2034 is the applicable standard. It covers residential, RV and marine applications. But it contains specific additional requirements for use on boats. So I'm guessing if it does not state is rated for marine or boat use, it doesn't meet these supplemental requirements. Not sure what they are. There used to be a separate UL standard for boat CO detectors, but it was deleted and those requirements were added to UL 2034 as additional requirements for marine use. Dave Castor On Mon, Nov 27, 2017 at 12:44 PM, Della Barba, Joe via CnC-List <cnc-list@cnc-list.com> wrote: My original coal mine CO detector died long ago. I replaced it with a Xintex marine CO detector. It is now old enough to need replacement or a factory refurb if they will do it. That will cost either $140 or so for new or $25 for a refurb. So I was in the hardware store and what do you know – a home CO detector for $25 brand new and it runs on batteries. Does anyone have any idea if these are suitable for a boat? I am going to get something, no way do I want people sleeping below without some kind of alarm. Joe Della Barba Coquina _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
