The way to avoid the hub coming off when you get the BANG (and you will get 
one) is to back off the retaining nut on the end of the shaft but do not 
completely remove it. When the hub comes free of the taper on the shaft, it can 
only move part of an inch before the nut stops the motion.

 

Rick Brass

Washington, NC

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William 
Walker via CnC-List
Sent: Sunday, May 07, 2017 5:30 PM
To: cnc-list@cnc-list.com
Cc: wwadjo...@aol.com
Subject: Re: Stus-List Prop question

 

Matt,
  Google "gear puller".. you will see pictures of what you are needing..Tractor 
Supply, Home Depot, various retailers sell.  Simple..Do it over something like 
grass because sometimes comes off with a BANG when finally comes free..
Bill Walker
CnC  36
Pentwater, Michigan

Sent from AOL Mobile Mail

  _____  

On Sunday, May 7, 2017 Matthew L. Wolford via CnC-List <cnc-list@cnc-list.com 
<mailto:cnc-list@cnc-list.com> > wrote:

Listers:

 

    I assume this has been covered before, but what is the best way to remove a 
40-year old Martec folding prop from the shaft?  The blades are off and the 
inside of the hub exposed, but the hub is not budging.  Please advise.  Thanks.

 

 

Matthew L. Wolford 
638 West Sixth Street 
Erie, PA 16507 
(814) 459-9600 (Office) 
(814) 459-9661 (Fax) 
(814) 392-5599 (Cell) 

The information contained in this e-mail note and any attachments is intended 
for the personal and confidential use of the designated recipient(s). This 
communication may be an attorney-client communication, attorney work product, 
or otherwise privileged, confidential, or protected from disclosure under 
applicable law. If you are not the intended recipient or an authorized agent, 
you are hereby notified that you have received this communication in error, and 
that any review, dissemination, distribution, copying of, use of, or reliance 
upon this communication is prohibited. If you believe this communication was 
sent to you in error, do not read it. Please reply to the sender that you 
received the note in error and delete it. Thank you.

Please consider the environment before printing this note.

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to: 
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to