Does PHRF-NE have comments on all the C & Cs or just that model? I would be curious to read their thoughts on the 40
David F. Risch 1981 40-2 (401) 419-4650 (cell) Date: Thu, 25 Aug 2016 13:27:38 -0300 To: cnc-list@cnc-list.com Subject: Re: Stus-List Mainsheet 37/40 From: cnc-list@cnc-list.com CC: kenhea...@gmail.com Kevin, You should see what the keel on Wave Train looks like, a Britt Chance designed racing bulb keel (aluminum & lead), one of a kind. Actually, this boat was extensively customized at the factory for the first owner during the initial build. Things like heavier bulkheads, all tabbed to the overhead (coach roof), a different layout inside, and so on. The Marine Museum of the Great Lakes at Kingston has blueprints specific to this custom "Wave Train" 37R in its archives showing the modifications requested by the first owner, Prof. Watt E. Webb. Ken H. On 25 August 2016 at 13:10, Kevin Driscoll via CnC-List <cnc-list@cnc-list.com> wrote: I googled Bruno's 37/40R (as the 37/40xl is a "maybe someday" boat for us) and this is what I came up with: http://www.phrfne.org/html/boats/cc37.htm It's a briefing on ratings for 37/40's. The very last line is this:"Be careful with a boat called WAVE TRAIN. Just about everything is different with this boat."Sounds like you have a special boat Bruno! KD 30-2 On Thu, Aug 25, 2016 at 8:01 AM Bruno Mannsberger via CnC-List <cnc-list@cnc-list.com> wrote: On ours, there is a through deck block that is inset within the boom so that the exit of the block lines up just below the centre of the boom. The main sheet is protected from the boom cut out by a stainless steel guard that is shown in the picture. Chaffing is a definite possibility based on the design. Bruno Mannsberger C&C37/40 R Wave Train Ladysmith BC From: Josh Muckley via CnC-List Sent: August 25, 2016 7:33 AM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Mainsheet 37/40 Evidently not the same on all 37+ or 37/40s. Mine doesn't look anything like that. I can't quite tell from the picture where the chafe is occurring but it kinda looks like the entry box (the place where it enters the boom on the right side of the picture) is missing a sheave. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Aug 24, 2016 6:41 PM, "Brian Fry via CnC-List" <cnc-list@cnc-list.com> wrote: My mainsheet enters the boom and is chafing at the entry point. There is another small block aft the pulls on the main sheet and seems to be causing The chafe. Is this standard on other C&Cs? http://i.imgur.com/tLfmXHf.jpg Brian Fry La Neige Havre de Grace MD _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
