I think Rick has it. I found something that looks identical on ebay.
Rick, are these indeed, reusable?
They do seem to be as the only thing that gets compressed is the hose
between the ferrule and the insert fitting
Danny
On 4/25/2016 10:33 AM, Rick Brass via CnC-List wrote:
The SAE standards for hose generally call for the hose to be marked
with the ID of the hose – so 5/16 hose is nominally 5/16 ID. This is
unlike tubing and pipe, where 5/16 is 5/16 OD.
The exception is SAE type 5 hose (I think it is supposed to be marked
with the SAE standard 1005 on the layline of the hose). Type 5 hose is
called “tubing size” and the ID of the hose is the same as the ID of
the same size hydraulic tubing. So 5/16 type 5 hose is a bit under ¼”
ID, and something like 7/16” OD. It is hydraulic hose rated at 5000
PSI or so, and is not fuel hose. Type 5 hose was originally created
for use in aircraft during WWII, because you would not want to carry
around the weight of metal tubing and the extra fluid contained in a
larger ID hose – plus hose was a lot easier to inventory and replace
than metal tubes on military airplanes being repaired around the world.
Fuel hose is basically type 1, IIRC, rated to something like 1000 PSI.
Made with an inner tube that is resistant to fuels and most solvents
(though not all). The reinforcement is made to allow the hose to be
more flexible and have shorter bend radius than hydraulic hoses. It
also will work as suction hose, which many types of hydraulic hose
will not.
Never use anything except fuel hose in fuel system applications.
Rick Brass
Washington, NC
I didn’t stay in a Holiday Inn last night, about 30 years ago I was an
engineer for Aeroquip.
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*Charlie Nelson via CnC-List
*Sent:* Sunday, April 24, 2016 10:44 PM
*To:* cnc-list@cnc-list.com
*Cc:* cenel...@aol.com
*Subject:* Re: Stus-List Diesel fuel lines questions
A word of warning--these hoses are notorious for variations between
the OD and ID so do not assume that if your hose is marked 5/16" on
the outside that the inside diameter (ID)
will match your fittings.
Depending on your hose source, a 5/16" OD hose could have a variety of
IDs--some wall thicknesses are greater than others but this number
is often not noted on the outside of the hose.
If the hose is going on barbed fittings, some to this can be made up
by the hose clamps (double always IMHO). However, a thick-walled 5/16"
hose may never go over a 1/4" barb fitting.
Charlie Nelson
Water Phantom
C&C 36 XL/kcb
cenel...@aol.com <mailto:cenel...@aol.com>
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
