I am sure you could take the hose to your local hydraulic hose shop or hardware store and figure out what the fittings are. There are only so many kinds of flare fittings. Don't get too hung up on the hose - I assume you need new hoses. What you need to know is what kind of fittings your new hose will need. You don't have to get the exact same kind of hose. I think if you poke around here - http://www.fisheriessupply.com/trident-marine-221fr-type-a1-blue-steel-braid-fuel-hose - you can find what you need. Joe Coquina C&C 35 MK I
-----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Monday, April 25, 2016 07:40 To: cnc-list@cnc-list.com Cc: djhaug...@juno.com Subject: Re: Stus-List Diesel fuel lines questions Hi Joe, No they're a metal band crimped over the fitting. DannyOn Apr 25, 2016 6:25 AM, "Della Barba, Joe via CnC-List" <cnc-list@cnc-list.com> wrote: > > Do you have something like AeroQuip lines with AN fittings? > > http://anfittingguide.com/wp-content/uploads/2014/01/aeroquip-startlite-hose.jpg > > These hoses come in a hug variety of materials and quality from many > different vendors. Many of the cheaper ones will leak when old as the rubber > dries out and very few actually meet the marine fire resistance > specifications. > > Joe > > Coquina > > C&C 35 MK I > > � > > � > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny > Haughey via CnC-List > Sent: Sunday, April 24, 2016 18:09 > To: cnc-list@cnc-list.com > Cc: Danny Haughey > Subject: Re: Stus-List Diesel fuel lines questions > > � > > Thanks for chiming in guys. The lines currently are pre-made with what look > like flare fittings on the end. The hose is coveted in some kind of sleeve > that looks and geeks like fabric. They are permeating pretty badly and making > the whole boat smell like diesel. > > � > > I'm guessing there is more to replacing these houses than just swapping them > out. Some bleeding? > > � > > I see that 1/4 is stamped on the fitting. I'm sure that's identifying size. > > � > > Danny > > � > > � > > � > > Sent from my T-Mobile 4G LTE Device > > -------- Original message -------- > > From: Jake Brodersen via CnC-List > > Date: 4/24/2016 4:53 PM (GMT-05:00) > > To: cnc-list@cnc-list.com > > Cc: Jake Brodersen > > Subject: Re: Stus-List Diesel fuel lines questions > > � > > Danny, > > If we�re talking about rubber fuel lines, yes, any lines that meet the marine > spec for the fuel you use (diesel or gas) will work. > > Most rubber fuel hoses don�t use fittings, although I have seen some premade > one that do use crimped on fittings. More information would be useful. > > Jake > > Jake Brodersen > > C&C 35 Mk-III �Midnight Mistress� > > Hampton VA > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny > Haughey via CnC-List > Sent: Sunday, April 24, 2016 09:27 > To: cnc-list@cnc-list.com > Cc: Danny Haughey > Subject: Stus-List Diesel fuel lines questions > > Hi guys, > > I need to replace my 1/4 inch fuel supply and return lines. > > Should I buy pre made fuel lines or could I just buy fuel hose and fittings > so I can cut to length? > > What word be a good source fir fuel lines? > > Danny > > Sent from my T-Mobile 4G LTE Device _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
