I have a 27-III.I have drilled and tapped holes - top and bottom- to allow water to drain in the fall. Inserts go in about now. System has worked for 20+ years.
Sent from my iPhone > On Apr 20, 2016, at 8:05 AM, William Walker via CnC-List > <cnc-list@cnc-list.com> wrote: > > Take a small drill bit or ask that fits easily in the hole and " measure" how > deep the set screw holes are and you should be able to tell. If so and you > can't get them out, drill them out and re tap set screws holes if needed with > slightly larger. Good luck. > Bill Walker > > Sent from AOL Mobile Mail > > > > On Wednesday, April 20, 2016 Rick Brass via CnC-List <cnc-list@cnc-list.com> > wrote: > > That was my question, too. > > > > Mine came off with just the use of a large rubber strap wrench. > > > > > > Rick Brass > > Washington, NC > > > > > > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > wwadjo...@aol.com via CnC-List > Sent: Wednesday, April 20, 2016 7:32 AM > To: cnc-list@cnc-list.com > Cc: wwadjo...@aol.com > Subject: Re: Stus-List Rudder collar "donut" removal > > > > Is it possible that a PO doubled up the set screws? > Bill Walker > CnC 36 > > Sent from my LG G Pad F™ 8.0, an AT&T 4G LTE tablet > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
