Randy,

No oil on exterior teak!  You will have a sticky mess.  Sorry, natural or
varnish.

Joel

On Tue, Apr 19, 2016 at 2:21 PM, Randy Stafford via CnC-List <
cnc-list@cnc-list.com> wrote:

> Listers-
>
> My next project is to refinish and re-bed the teak hand rails on the cabin
> top of my boat.  Any tips on how to remove them?  I believe there are
> screws covered by bungs from the interior hand rails to the exterior hand
> rails aft of the bulkhead separating the salon from the head.  But how are
> the exterior handrails fastened forward of that bulkhead?  (the exterior
> hand rails extend farther forward than the interior ones).
>
> I need to remove them in order to re-bed them, as I've got a leak from the
> port aft screw hole onto my ice box lid and galley countertop around it,
> causing delamination of the plywood countertop at the ice box lid cutout.
>
> My plan is to strip them (if necessary), sand them, and just oil them with
> teak oil, following instructions from Don Casey.  If you think a sealer or
> varnish would be better, I'd be interested in hearing your opinion.
>
> Also, inspired by Dennis's pictures from Touche, I've posted a few
> pictures of my boat at
> https://drive.google.com/open?id=0B-NqAxQ6JxFTaUlpUkZJWGt5RVk.  So far
> the only projects I've done are cosmetic stuff on the hull exterior: lots
> of topsides buffing and waxing, putting on my own transom decals, sanding
> and repainting the boot stripe, and spot-sanding and re-coating the bottom
> with VC-17 (plus adding a combination spare tire / carrier wheel to the
> trailer).
>
> I'd like to thank you all again for making this list such an outstanding
> resource.  I'm very grateful to be able to communicate with you all.  And
> special shout-out to Stu Murray for making all this possible - I just
> ordered five quantity of "Photo Album Support" from the C&C Photo Album
> Online Chandlery in appreciation.
>
> Cheers,
> Randy
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> like what we do, please help us pay for our costs by donating. All
> Contributions are greatly appreciated!
>
>


-- 
Joel
301 541 8551
_______________________________________________

This list is supported by the generous donations of our members. If you like 
what we do, please help us pay for our costs by donating. All Contributions are 
greatly appreciated!

Reply via email to