Roger Roger Tim Much obliged Sir
JW On Oct 18, 2015 9:06 AM, "Tim Goodyear via CnC-List" <cnc-list@cnc-list.com> wrote: > Hi John, > > There are a couple of people interested so far - one of whom may be > challenged by fit and the other by shipping, so I'll let you know if those > don't work out. > > Thanks, > > Tim > > On Sat, Oct 17, 2015 at 11:25 PM, John and Maryann Read via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hi Tim >> >> >> >> We might be interested in giving these a good home. Can you please >> advise the vertical dimension from the deck fitting to the peak of the >> bow? Will measure ours tomorrow to see what will fit >> >> >> >> >> >> John and Maryann >> >> Legacy III >> >> 1982 C&C 34 >> >> Noank, CT >> >> >> >> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Tim >> Goodyear via CnC-List >> *Sent:* Saturday, October 17, 2015 3:12 PM >> *To:* cnc-list@cnc-list.com >> *Cc:* Tim Goodyear >> *Subject:* Re: Stus-List Recycling old dodger >> >> >> >> The stainless dodger bows are 79" across, and here are some photographs: >> >> >> >> https://goo.gl/photos/Rpo3E8DA25y8vNYf7 >> >> >> >> Available to a good home if any use to anyone. All stitching needs to be >> replaced, but the cloth is not bad and it's a fair template to base a new >> one one. >> >> >> >> Thanks, >> >> >> >> Tim >> >> Mojito >> >> C&C 35-3 >> >> Branford, CT >> >> >> >> On Tue, Oct 13, 2015 at 4:54 PM, Dennis C. via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> Tim, >> >> Post the width of the bow as a start. I don't need it but I recycled one >> off a Pearson 365 for my aft Bimini. Creatively mounted it on the stern >> pulpit to get the right height. >> >> Dennis C. >> >> On Oct 13, 2015 3:47 PM, "Tim Goodyear via CnC-List" < >> cnc-list@cnc-list.com> wrote: >> >> I replaced the dodger on my 35-3 earlier this year with a different >> shaped version and now have the old bows sitting in my garden. Does anyone >> know if they would be useful to anyone rather than throwing them away? I >> have the old dodger too - the cloth is OK'ish, but *all* the stitching >> disintegrated at the same time. >> >> >> >> Thanks, >> >> >> >> Tim >> >> Soon to be an ex-C&C owner (I hope you'll still let me lurk) >> >> Branford, CT >> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> >> ------------------------------ >> [image: Avast logo] <https://www.avast.com/antivirus> >> >> This email has been checked for viruses by Avast antivirus software. >> www.avast.com <https://www.avast.com/antivirus> >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
