The height is 39" > On Oct 17, 2015, at 11:25 PM, John and Maryann Read via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hi Tim > > We might be interested in giving these a good home. Can you please advise > the vertical dimension from the deck fitting to the peak of the bow? Will > measure ours tomorrow to see what will fit > > > John and Maryann > Legacy III > 1982 C&C 34 > Noank, CT > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim > Goodyear via CnC-List > Sent: Saturday, October 17, 2015 3:12 PM > To: cnc-list@cnc-list.com > Cc: Tim Goodyear > Subject: Re: Stus-List Recycling old dodger > > The stainless dodger bows are 79" across, and here are some photographs: > > https://goo.gl/photos/Rpo3E8DA25y8vNYf7 > > Available to a good home if any use to anyone. All stitching needs to be > replaced, but the cloth is not bad and it's a fair template to base a new one > one. > > Thanks, > > Tim > Mojito > C&C 35-3 > Branford, CT > > On Tue, Oct 13, 2015 at 4:54 PM, Dennis C. via CnC-List > <cnc-list@cnc-list.com> wrote: > Tim, > > Post the width of the bow as a start. I don't need it but I recycled one off > a Pearson 365 for my aft Bimini. Creatively mounted it on the stern pulpit > to get the right height. > > Dennis C. > > On Oct 13, 2015 3:47 PM, "Tim Goodyear via CnC-List" <cnc-list@cnc-list.com> > wrote: > I replaced the dodger on my 35-3 earlier this year with a different shaped > version and now have the old bows sitting in my garden. Does anyone know if > they would be useful to anyone rather than throwing them away? I have the > old dodger too - the cloth is OK'ish, but *all* the stitching disintegrated > at the same time. > > Thanks, > > Tim > Soon to be an ex-C&C owner (I hope you'll still let me lurk) > Branford, CT > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > > > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________
Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
