Hi John, There are a couple of people interested so far - one of whom may be challenged by fit and the other by shipping, so I'll let you know if those don't work out.
Thanks, Tim On Sat, Oct 17, 2015 at 11:25 PM, John and Maryann Read via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Tim > > > > We might be interested in giving these a good home. Can you please advise > the vertical dimension from the deck fitting to the peak of the bow? Will > measure ours tomorrow to see what will fit > > > > > > John and Maryann > > Legacy III > > 1982 C&C 34 > > Noank, CT > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Tim > Goodyear via CnC-List > *Sent:* Saturday, October 17, 2015 3:12 PM > *To:* cnc-list@cnc-list.com > *Cc:* Tim Goodyear > *Subject:* Re: Stus-List Recycling old dodger > > > > The stainless dodger bows are 79" across, and here are some photographs: > > > > https://goo.gl/photos/Rpo3E8DA25y8vNYf7 > > > > Available to a good home if any use to anyone. All stitching needs to be > replaced, but the cloth is not bad and it's a fair template to base a new > one one. > > > > Thanks, > > > > Tim > > Mojito > > C&C 35-3 > > Branford, CT > > > > On Tue, Oct 13, 2015 at 4:54 PM, Dennis C. via CnC-List < > cnc-list@cnc-list.com> wrote: > > Tim, > > Post the width of the bow as a start. I don't need it but I recycled one > off a Pearson 365 for my aft Bimini. Creatively mounted it on the stern > pulpit to get the right height. > > Dennis C. > > On Oct 13, 2015 3:47 PM, "Tim Goodyear via CnC-List" < > cnc-list@cnc-list.com> wrote: > > I replaced the dodger on my 35-3 earlier this year with a different shaped > version and now have the old bows sitting in my garden. Does anyone know > if they would be useful to anyone rather than throwing them away? I have > the old dodger too - the cloth is OK'ish, but *all* the stitching > disintegrated at the same time. > > > > Thanks, > > > > Tim > > Soon to be an ex-C&C owner (I hope you'll still let me lurk) > > Branford, CT > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > ------------------------------ > [image: Avast logo] <https://www.avast.com/antivirus> > > This email has been checked for viruses by Avast antivirus software. > www.avast.com <https://www.avast.com/antivirus> > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
