Sorry, that was the wrong link — those are for 1/4” bolts. This is the correct one for #10 bolts:
http://www.mscdirect.com/product/details/02650943 <http://www.mscdirect.com/product/details/02650943> And this one for #8 bolts: http://www.mscdirect.com/product/details/02650992 Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Sep 23, 2015, at 8:57 AM, Frederick G Street via CnC-List > <cnc-list@cnc-list.com> wrote: > > The biggest difference I’ve seen is price; put the word “marine” or “boat” on > anything and the cost goes up. > > As with the others, I’ve had good luck with a good GFCI from Home Depot; you > may need to put a bigger back-box in, though, as they don’t wire too well > into standard electrical boxes as they’re so big. Also, NO WIRE NUTS!!! And > you should use locking fork terminals that snap over the screws, rather than > try to wrap the wire around and tighten the screw (that doesn't satisfy the > ABYC standards): > > http://www.mscdirect.com/product/details/02650968?src=pla&cid=PLA-Google-PLA+-+Test&CS_003=7867724&CS_010=02650968 > > <http://www.mscdirect.com/product/details/02650968?src=pla&cid=PLA-Google-PLA+-+Test&CS_003=7867724&CS_010=02650968> > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
