Joe, I had the same symptoms with my knotmeter last week. The boat had been unused for several weeks with the bung installed. I installed the transducer(s) before leaving the dock and the knotmeter read zero until we had covered about 5 miles when it started reading correctly. I assumed there was a build-up of growth in front of the paddlewheel, and it performed fine for the rest of the trip.
Monty Scandia 1991 C&C 34+ Annapolos, MD On Mon, Aug 24, 2015 at 5:00 PM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Coquina just got hauled this morning. Now I can go over and see why my > knotmeter reads 0 underway, but if I pull the impellor out and spin it the > readings are good. Any ideas why the paddlewheel spins freely in my hand > but not in the water??? > > BTW – the diver that cleaned my bottom said now I had 3 different colors > of paint showing maybe it was time for more LOL. The last time I painted I > did one blue layer and one red layer over black original. It seems to have > ablated itself right off the boat. > > > > Joe Della Barba > > Coquina > > C&C 35 MK I > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
