Hi Brian,
I know the new prop is a Gori folding prop, but I don't know what the
problematic problem was. Perhaps Gary Kolc can help.
Gary R.
~~~~~~~_/)~~~~~~
On Mon, Jun 15, 2015 at 5:41 PM, Nauset Beach via CnC-List <
cnc-list@cnc-list.com> wrote:
> Gary R and / or Gary K
>
>
>
> Was there any indication as to what about the prop that was causing the
> vibration? Do you know what type of prop(s) the original and replacements
> were?
>
>
>
> I have had a fair amount of vibration after replacing the shaft, coupling
> and engine mounts, and the only culprit left is the prop itself.
>
>
>
> Thanks,
>
> Brian
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary
> Russell via CnC-List
> *Sent:* Monday, June 15, 2015 5:00 PM
> *To:* C&C List
> *Cc:* Gary Russell
> *Subject:* Re: Stus-List Cored Hull
>
>
>
> Hi Gary,
>
> Thanks for the encouragement. I was familiar with the prop problem
> and have been following the boat for a couple of years.
>
>
>
> Fair winds,
>
> Gary
>
>
> ~~~~~~~_/)~~~~~~
>
>
>
> On Sun, Jun 14, 2015 at 9:28 PM, ahycrace--- via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Gary
> Ron solved the vibration problem with a new prop last year smooth
> as silk now. He also had the backstay area reinforced and the hull was
> addressed as well, it should fly through a survey no problem. The boat is
> in better shape than Ron is !
>
> Gary K. "Liberty"
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
