Here's how I do it even for just a coastal sail:
http://www.cruisingworld.com/how/sailing-downwind-set-whisker-pole

Andy
C&C 40
Peregrine

On Wed, May 27, 2015 at 5:42 PM, jtsails via CnC-List <cnc-list@cnc-list.com
> wrote:

>   David,
> I would simply run the sheet through the pole end, the angle should keep
> the pole pushed against the clew. Another option would be to tie the sheet
> to the clew with a bowline and hook the pole into the eye of the bowline.
> James
> “Delaney”
> C&C 38 mk2
> Oriental, nc
>
>  *From:* David Knecht via CnC-List <cnc-list@cnc-list.com>
> *Sent:* Wednesday, May 27, 2015 10:16 AM
> *To:* CnC CnC discussion list <cnc-list@cnc-list.com>
> *Cc:* David Knecht <davidakne...@gmail.com>
> *Subject:* Stus-List Whisker pole attachment to genoa
>
> Speaking of whisker poles, I now have one (Thanks- Chuck!!).  One thing I
> have found is that with the genoa sheets attached, it is hard to find space
> to attach the pole end to the clew ring.  I am thinking of adding a small
> loop of lineto the ring to use for attaching the pole, but am worried about
> it catching on things.  Any suggestions?  Thanks- Dave
>
>
> On May 26, 2015, at 9:40 PM, Chuck S via CnC-List <cnc-list@cnc-list.com>
> wrote:
>
>   Very clever Francois.  I'm copying the 34/36 group.
>
> ------------------------------
> *From: *"Jean-Francois J Rivard via CnC-List" <cnc-list@cnc-list.com>
> *To: *cnc-list@cnc-list.com
> *Cc: *"Jean-Francois J Rivard" <jfriv...@us.ibm.com>
> *Sent: *Tuesday, May 26, 2015 4:49:44 PM
> *Subject: *Stus-List Pictures of my DIY whisker pole mounts
>
> Hi, A while back I mentioned I that I made some DIY mounts for my new
> whisker pole, you can check them out on Flickr here:
> https://www.flickr.com/photos/133565480@N04/
>
> The links for the parts used are on the photo descriptions.
>
>
> Regards,
>
> -Francois Rivard
> 1990 34+ "Take Five"
> Lake Lanier, GA
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>  Aries
> 1990 C&C 34+
> New London, CT
>
>
>
> ------------------------------
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>


-- 
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone  +401 965 5260
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to