David, I would simply run the sheet through the pole end, the angle should keep the pole pushed against the clew. Another option would be to tie the sheet to the clew with a bowline and hook the pole into the eye of the bowline. James “Delaney” C&C 38 mk2 Oriental, nc
From: David Knecht via CnC-List Sent: Wednesday, May 27, 2015 10:16 AM To: CnC CnC discussion list Cc: David Knecht Subject: Stus-List Whisker pole attachment to genoa Speaking of whisker poles, I now have one (Thanks- Chuck!!). One thing I have found is that with the genoa sheets attached, it is hard to find space to attach the pole end to the clew ring. I am thinking of adding a small loop of lineto the ring to use for attaching the pole, but am worried about it catching on things. Any suggestions? Thanks- Dave On May 26, 2015, at 9:40 PM, Chuck S via CnC-List <cnc-list@cnc-list.com> wrote: Very clever Francois. I'm copying the 34/36 group. ------------------------------------------------------------------------------ From: "Jean-Francois J Rivard via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Cc: "Jean-Francois J Rivard" <jfriv...@us.ibm.com> Sent: Tuesday, May 26, 2015 4:49:44 PM Subject: Stus-List Pictures of my DIY whisker pole mounts Hi, A while back I mentioned I that I made some DIY mounts for my new whisker pole, you can check them out on Flickr here: https://www.flickr.com/photos/133565480@N04/ The links for the parts used are on the photo descriptions. Regards, -Francois Rivard 1990 34+ "Take Five" Lake Lanier, GA _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com Aries 1990 C&C 34+ New London, CT -------------------------------------------------------------------------------- _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
