Speaking of whisker poles, I now have one (Thanks- Chuck!!). One thing I have found is that with the genoa sheets attached, it is hard to find space to attach the pole end to the clew ring. I am thinking of adding a small loop of lineto the ring to use for attaching the pole, but am worried about it catching on things. Any suggestions? Thanks- Dave
> On May 26, 2015, at 9:40 PM, Chuck S via CnC-List <cnc-list@cnc-list.com> > wrote: > > Very clever Francois. I'm copying the 34/36 group. > > From: "Jean-Francois J Rivard via CnC-List" <cnc-list@cnc-list.com> > To: cnc-list@cnc-list.com > Cc: "Jean-Francois J Rivard" <jfriv...@us.ibm.com> > Sent: Tuesday, May 26, 2015 4:49:44 PM > Subject: Stus-List Pictures of my DIY whisker pole mounts > > Hi, A while back I mentioned I that I made some DIY mounts for my new whisker > pole, you can check them out on Flickr here: > https://www.flickr.com/photos/133565480@N04/ > <https://www.flickr.com/photos/133565480@N04/> > > The links for the parts used are on the photo descriptions. > > > Regards, > > -Francois Rivard > 1990 34+ "Take Five" > Lake Lanier, GA > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > Aries 1990 C&C 34+ New London, CT
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com