Mike:
Now that I am an 'instant expert' on marine window installation, I can
be engaged on a 'consulting basis' for a mere few adult beverages. I
estimate it would take me about two beers to fully describe the
process. Jeff has already done it so I fear it might be a one beer down
load but I am confident I can stretch it out to two.
I still don't know where Persistence is at the club?
Rob
On 2015-04-22 9:23 AM, Hoyt, Mike wrote:
Boat_Sig
Jeff
If you read carefully between the lines I believe Rob said “I will
come to AYC and help you install them” ….
Mike
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
*robert via CnC-List
*Sent:* Tuesday, April 21, 2015 10:26 PM
*To:* Jeffrey Nelson; cnc-list@cnc-list.com
*Subject:* Re: Stus-List Window Replacement
Jeff:
Due to leaks in the windows, and no matter what I tried, the leaks
didn't stop until we replaced the windows. I took the old windows to
the retailer who produced new acrylic windows and we installed with
Sika 295UV. I have posted the step by step process here on the list
several times so I won't subject the listers with it another time.
If you decide to go that route, contact me off list and I will take
you through the process we followed.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2015-04-20 7:24 PM, Jeffrey Nelson via CnC-List wrote:
Given the amount of water dripping onto my galley table,
re-caulking isn't going to do it for long.
Take your windows out, take them to any place that deals with
acrylic and have them duplicate them...if you break your windows
make a template
out of 1/4 plywood to take in.
Let me know if you come up with a good glue solution...I'm looking
to do mine again, as I apparently didn't use enough glue or
clamping and
my windows have sprung out a bit...enabling water to get in...
Cheers,
Jeff
C&C30 Mk 1
Muir Caileag
On 20/04/2015 1:51 PM, Ron Ander via CnC-List wrote:
I need to repair some leaking from the windows. It was
suggested to me that removing the existing windows, cleaning
up the surfaces, and reinstalling them can be a problem
because the windows might break.
Does re-caulking alone solve a leaking problem?
If I need new windows where can I purchase them in the Toronto
area?
Ron Ander
Alchemist
C&C 29 Mk 2, 1986
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30
Armdale Y.C.
Halifax
_______________________________________________
Email address:
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
To change your list preferences, including unsubscribing -- go to the
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
