Jeff:
Due to leaks in the windows, and no matter what I tried, the leaks
didn't stop until we replaced the windows. I took the old windows to
the retailer who produced new acrylic windows and we installed with Sika
295UV. I have posted the step by step process here on the list several
times so I won't subject the listers with it another time.
If you decide to go that route, contact me off list and I will take you
through the process we followed.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2015-04-20 7:24 PM, Jeffrey Nelson via CnC-List wrote:
Given the amount of water dripping onto my galley table, re-caulking
isn't going to do it for long.
Take your windows out, take them to any place that deals with acrylic
and have them duplicate them...if you break your windows make a template
out of 1/4 plywood to take in.
Let me know if you come up with a good glue solution...I'm looking to
do mine again, as I apparently didn't use enough glue or clamping and
my windows have sprung out a bit...enabling water to get in...
Cheers,
Jeff
C&C30 Mk 1
Muir Caileag
On 20/04/2015 1:51 PM, Ron Ander via CnC-List wrote:
I need to repair some leaking from the windows. It was suggested to
me that removing the existing windows, cleaning up the surfaces, and
reinstalling them can be a problem because the windows might break.
Does re-caulking alone solve a leaking problem?
If I need new windows where can I purchase them in the Toronto area?
Ron Ander
Alchemist
C&C 29 Mk 2, 1986
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
--
Boat_Sig Cheers,
Jeff Nelson
Muir Caileag
C&C 30
Armdale Y.C.
Halifax
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
