No, you would also have to purchase a Raymarine iTC-5 Instrument Transducer Converter and a few more cables to make up a small SeaTalk ng network as there are no connections on the i70 for the transducers.
http://www.raymarine.com/view/?id=3338 ...or you could keep the i50 tridata instrument mounted and hooked up somewhere on the boat and connect an i70 to it using a single SeaTalk ng cable. Ken H. On 26 March 2015 at 18:09, Robert Hrabinsky via CnC-List < cnc-list@cnc-list.com> wrote: > Stupid question: I just installed an i50 tridata instrument on my bulkhead > last season. If I wanted to do so, could I swap in an i70 on a plug and > play basis? > > Robert H. > 1989 C&C 30 MKII > > > Sent from my Samsung device > > > -------- Original message -------- > From: Ron Ricci via CnC-List <cnc-list@cnc-list.com> > Date: 03-26-2015 1:38 PM (GMT-08:00) > To: 'Chuck Borge' <chuckbo...@gmail.com> > Cc: cnc-list@cnc-list.com > Subject: Re: Stus-List New instruments? > > Chuck, > > > > Ditto on Fred’s i70 recommendation. I looked at i50/60’s but ended up > with four i70’s. Two are on each side of the companionway so they are > easily visible from the helm and anywhere in the cockpit. Depending upon > what I’m doing, they are set to display whatever I data needed at the > time. I’m glad that I invested the slight extra $. > > > > Regards, > > *Ron* > > Ronald V. Ricci > > S/V Patriot > > C&C 37+ > > Bristol, RI > > ron.ri...@1968.usna.com > > > > > > > > *From:* Frederick G Street [mailto:f...@postaudio.net] > *Sent:* Thursday, March 26, 2015 3:07 PM > *To:* Chuck Borge; cnc-list@cnc-list.com > *Subject:* Re: Stus-List New instruments? > > > > Chuck — I recently had this discussion off-list with Jake Broderson; my > take was that the i50/i60 displays will only ever do one thing. The wind > display will only ever display wind. For not much more, you could get into > the i70 system; it only comes with one display to start, but that display > can show any data on the bus. So you can set it up in tri-data mode and > display wind, speed and depth on the one display (like this): > > > > > > Want to add another display? Change the data shown on the first display, > and add other data on the new one. It’s a very nice, customizable system. > > > > Raymarine has a rebate on until the end of April; you can get $50 back on > any instrument purchase. If you want special C&C lister pricing, contact > me off-list. And there are others on the list for whom I’ve provided gear, > including the i70 System — ask around for their experience. > > > Fred Street -- Minneapolis > S/V *Oceanis* (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > > > On Mar 26, 2015, at 12:59 PM, Chuck Borge via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Hi Edd, Joel, > > > > Thanks for the info. It occurred to me that I meant the i50/i60 bundle > (wired). I was waffling about the wireless, but since I tend to leave the > dodger up, I was concerned about there being enough sunlight to keep the > solar up. > > Also, at some point I'll probably get back to racing, and I like the > analog reading on the i60 better. > > > > > > So let's start over... remarks about the i50/i60 bundle, please? > > > > Thanks, > > Chuck B > > C&C 34 Elusive > > Somerset, MA > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
