Thanks Graham. Boat currently has a Garmin GPS and wind speed/gps speed but no plotter or moving map. Would the raymarine work with those?
Thanks Joe Sent from my iPad > On Feb 28, 2015, at 9:37 PM, Graham Collins <cnclistforw...@hotmail.com> > wrote: > > Hi Joe > Depends on what you want to use it for, I would doubt the EV-100 would > suffice in any strong weather conditions, you would be at the upper limit of > its capabilities. The EV-200 would be a better fit. > > The other consideration is integration with whatever other electronics you > have or are contemplating. I've got an EV-200 and an A7 plotter, they play > nicely together and allow me to do the software updates to the system > (usually requires a same brand plotter). If I had a Garmin plotter some > things would not work together. > > Graham Collins > Secret Plans > C&C 35-III #11 > >> On 2015-02-28 9:45 PM, Joe Scott via CnC-List wrote: >> Hi All, >> >> I have been reading stuff on here for a while but this is my first email. >> We got our 1976 C&C 38 at the end of last summer and have been looking for >> (among a bunch of other stuff:) an Autopilot. Anyone have any experience >> with the Ev-100 on a boat this size? From the specs I’d say its close to >> being not enough. If it’s not enough, anyone have a recommendation? >> >> Thanks, >> >> Joe Scott >> 1976 C&C 38 >> Ashtabula Oh >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
