Wise decision. On Mar 2, 2015 9:08 PM, "Joseph Scott via CnC-List" <cnc-list@cnc-list.com> wrote:
> Thanks to everyone. With all this in mind I think ill be holding off on > the autopilot for a bit. The under deck units are much more expensive and > seem like much more involved to install. With this going to be our first > full season with the new boat there are many other things that will take > priority over the autopilot. More questions from me will follow:) > > Thanks all > > Joe > > Sent from my iPad > > > On Feb 28, 2015, at 8:37 PM, Graham Collins <cnclistforw...@hotmail.com> > wrote: > > > > Hi Joe > > Depends on what you want to use it for, I would doubt the EV-100 would > suffice in any strong weather conditions, you would be at the upper limit > of its capabilities. The EV-200 would be a better fit. > > > > The other consideration is integration with whatever other electronics > you have or are contemplating. I've got an EV-200 and an A7 plotter, they > play nicely together and allow me to do the software updates to the system > (usually requires a same brand plotter). If I had a Garmin plotter some > things would not work together. > > > > Graham Collins > > Secret Plans > > C&C 35-III #11 > > > >> On 2015-02-28 9:45 PM, Joe Scott via CnC-List wrote: > >> Hi All, > >> > >> I have been reading stuff on here for a while but this is my first > email. We got our 1976 C&C 38 at the end of last summer and have been > looking for (among a bunch of other stuff:) an Autopilot. Anyone have any > experience with the Ev-100 on a boat this size? From the specs I'd say its > close to being not enough. If it's not enough, anyone have a > recommendation? > >> > >> Thanks, > >> > >> Joe Scott > >> 1976 C&C 38 > >> Ashtabula Oh > >> _______________________________________________ > >> > >> Email address: > >> CnC-List@cnc-list.com > >> To change your list preferences, including unsubscribing -- go to the > bottom of page at: > >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com