Thanks to everyone. With all this in mind I think ill be holding off on the autopilot for a bit. The under deck units are much more expensive and seem like much more involved to install. With this going to be our first full season with the new boat there are many other things that will take priority over the autopilot. More questions from me will follow:)
Thanks all Joe Sent from my iPad > On Feb 28, 2015, at 8:37 PM, Graham Collins <cnclistforw...@hotmail.com> > wrote: > > Hi Joe > Depends on what you want to use it for, I would doubt the EV-100 would > suffice in any strong weather conditions, you would be at the upper limit of > its capabilities. The EV-200 would be a better fit. > > The other consideration is integration with whatever other electronics you > have or are contemplating. I've got an EV-200 and an A7 plotter, they play > nicely together and allow me to do the software updates to the system > (usually requires a same brand plotter). If I had a Garmin plotter some > things would not work together. > > Graham Collins > Secret Plans > C&C 35-III #11 > >> On 2015-02-28 9:45 PM, Joe Scott via CnC-List wrote: >> Hi All, >> >> I have been reading stuff on here for a while but this is my first email. >> We got our 1976 C&C 38 at the end of last summer and have been looking for >> (among a bunch of other stuff:) an Autopilot. Anyone have any experience >> with the Ev-100 on a boat this size? From the specs I’d say its close to >> being not enough. If it’s not enough, anyone have a recommendation? >> >> Thanks, >> >> Joe Scott >> 1976 C&C 38 >> Ashtabula Oh >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the bottom >> of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com