I am preparing to under a window replacement forward hatch re-glaze and a hand rail replacement. So should I use the smoked glass or clear? and what kind of glass should be used? C&C--Plastic (lexan), tempered glass, or regular glass? the glass in there now is all spider cracked and smoked in color. looks to be 1/4 thick no frames each of the longer windows have 8 small screws and the forward small windows have 4 screws. looks to be regular clear silicone. I have had a few small leaks but not many. Thanks for your help.
On Mon, Feb 16, 2015 at 10:18 AM, Edd Schillay via CnC-List < cnc-list@cnc-list.com> wrote: > Chuck, > > Only in a few spots, but that was mainly because I lost some patience in > prepping the surface and it came up. > > I also added some silicone around the edges to make sure no water got in > there. That also smoothed out the edges so nobody would snag or cut > themselves. My crew is not allowed to bleed until after races are finished. > > > All the best, > > Edd > > > Edd M. Schillay > Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > City Island, NY > Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/> > > On Feb 16, 2015, at 10:13 AM, Chuck S <cscheaf...@comcast.net> wrote: > > Hi Edd, > I like your method. Curious, if you used any other adhesive or fasteners > in addition to the tape? > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy River, Md > > ------------------------------ > *From: *"Edd Schillay via CnC-List" <cnc-list@cnc-list.com> > *To: *"Josh Muckley" <muckl...@gmail.com>, "<cnc-list@cnc-list.com>" < > cnc-list@cnc-list.com> > *Sent: *Monday, February 16, 2015 9:37:04 AM > *Subject: *Re: Stus-List Window Installation - 1985 41 > > Josh, > > I used the 3M 5952 VHB Tape: > http://www.staples.com/3M-5952-VHB-Tape-Dark-Gray-3-4-inch-x-5-yds/product_946573 > <http://www.staples.com/3M-5952-VHB-Tape-Dark-Gray-3-4-inch-x-5-yds/product_946573?cmArea=REORDER> > > > All the best, > > Edd > > > Edd M. Schillay > Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > City Island, NY > Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/> > > On Feb 15, 2015, at 4:40 PM, Josh Muckley <muckl...@gmail.com> wrote: > > Edd, > > I googled "3m fuselage tape" and couldn't cleary identify what product you > used. Could you please enlighten me. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Feb 8, 2015 8:38 PM, "Edd Schillay via CnC-List" <cnc-list@cnc-list.com> > wrote: > >> We have the frameless windows and did the replacement last Spring. We >> used 3M fuselage tape - and although the prep was a lot of work, we are >> very pleased with the end result. >> >> >> All the best, >> >> Edd >> >> ------------------------------- >> Edd M. Schillay >> Starship Enterprise >> NCC-1701-B >> C&C 37+ | City Island, NY >> www.StarshipSailing.com <http://www.starshipsailing.com/> >> ------------------------------- >> 914.332.4400 | Office >> 914.774.9767 | Mobile >> ------------------------------- >> Sent via iPhone 6 >> iPhone. iTypos. iApologize >> >> On Feb 8, 2015, at 8:24 PM, Frederick G Street via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> That might work; but butyl's NOT an adhesive, so you would definitely >> need the screws/bolts. >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( >> >> On Feb 8, 2015, at 7:22 PM, Gary Zuehlke via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> Would the butyl tape work on frameless windows that were attached by >> screws? What about bolts all the way through to some nice wood trim that >> would "clamp" the cabin top sides between the windows and interior trim? >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> _______________________________________________ >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go to the >> bottom of page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > -- *Best regards,* *Curtis McDaniel, * *C&C 30-MK1 East Coast Lady* Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. -Mark Twain http://eastcostlady.blogspot.com/ *cpt.b...@gmail.com <bobhick...@rogers.com>* *~~~~ __/) ~~~~* .
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
