Chuck,
Only in a few spots, but that was mainly because I lost some patience
in prepping the surface and it came up.
I also added some silicone around the edges to make sure no water got
in there. That also smoothed out the edges so nobody would snag or cut
themselves. My crew is not allowed to bleed until after races are finished.
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>
> On Feb 16, 2015, at 10:13 AM, Chuck S <cscheaf...@comcast.net> wrote:
>
> Hi Edd,
> I like your method. Curious, if you used any other adhesive or fasteners in
> addition to the tape?
>
>
> Chuck
> Resolute
> 1990 C&C 34R
> Broad Creek, Magothy River, Md
>
> From: "Edd Schillay via CnC-List" <cnc-list@cnc-list.com>
> To: "Josh Muckley" <muckl...@gmail.com>, "<cnc-list@cnc-list.com>"
> <cnc-list@cnc-list.com>
> Sent: Monday, February 16, 2015 9:37:04 AM
> Subject: Re: Stus-List Window Installation - 1985 41
>
> Josh,
>
> I used the 3M 5952 VHB Tape:
> http://www.staples.com/3M-5952-VHB-Tape-Dark-Gray-3-4-inch-x-5-yds/product_946573
>
> <http://www.staples.com/3M-5952-VHB-Tape-Dark-Gray-3-4-inch-x-5-yds/product_946573?cmArea=REORDER>
>
>
> All the best,
>
> Edd
>
>
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY
> Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>
>
> On Feb 15, 2015, at 4:40 PM, Josh Muckley <muckl...@gmail.com
> <mailto:muckl...@gmail.com>> wrote:
>
> Edd,
>
> I googled "3m fuselage tape" and couldn't cleary identify what product you
> used. Could you please enlighten me.
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
>
> On Feb 8, 2015 8:38 PM, "Edd Schillay via CnC-List" <cnc-list@cnc-list.com
> <mailto:cnc-list@cnc-list.com>> wrote:
> We have the frameless windows and did the replacement last Spring. We used 3M
> fuselage tape - and although the prep was a lot of work, we are very pleased
> with the end result.
>
>
> All the best,
>
> Edd
>
> -------------------------------
> Edd M. Schillay
> Starship Enterprise
> NCC-1701-B
> C&C 37+ | City Island, NY
> www.StarshipSailing.com <http://www.starshipsailing.com/>
> -------------------------------
> 914.332.4400 <tel:914.332.4400> | Office
> 914.774.9767 <tel:914.774.9767> | Mobile
> -------------------------------
> Sent via iPhone 6
> iPhone. iTypos. iApologize
>
> On Feb 8, 2015, at 8:24 PM, Frederick G Street via CnC-List
> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:
>
> That might work; but butyl’s NOT an adhesive, so you would definitely need
> the screws/bolts.
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
>
> On Feb 8, 2015, at 7:22 PM, Gary Zuehlke via CnC-List <cnc-list@cnc-list.com
> <mailto:cnc-list@cnc-list.com>> wrote:
>
> Would the butyl tape work on frameless windows that were attached by screws?
> What about bolts all the way through to some nice wood trim that would
> "clamp" the cabin top sides between the windows and interior trim?
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
> To change your list preferences, including unsubscribing -- go to the bottom
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> <http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>
> To change your list preferences, including unsubscribing -- go to the bottom
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> <http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com>
>
>
>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
