You are right. The owners manual states the M4-30 is 25Hp @ 3600 RPM. Transmission has a 2:1 reduction.
----- Original Message ----- From: "Gary Russell via CnC-List" <cnc-list@cnc-list.com> To: "Joe Della Barba" <joe.della.ba...@ssa.gov>, "C&C List" <cnc-list@cnc-list.com> Sent: Thursday, January 29, 2015 2:31:40 PM Subject: Re: Stus-List Universal M4-30 (Eric Baumes) I could be wrong... Ask my wife, but I think an M430 is 25 HP even though the model number would make you think it was 30. Gary S/V Expresso '75 C&C 35 Mk II East Greenwich, RI, USA ~~~~~~~ _ / ) ~~~~~~ On Thu, Jan 29, 2015 at 1:42 PM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com > wrote: + 1 A 30 HP diesel is HUGE for a 29 foot boat. An A4 powered 29 would have the 1:1 tranny, so depending on the prop you would have between about 15 and 25 HP available. Joe Della Barba From: CnC-List [mailto: cnc-list-boun...@cnc-list.com ] On Behalf Of Robert Gallagher via CnC-List Sent: Thursday, January 29, 2015 12:21 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Universal M4-30 (Eric Baumes) I have to ask the question: will it fit in the hole? That's a lot of engine for a 29ft boat. The A-4 only put out About 18hp at the RPM that it probably generated pushing your boat. My yanmar 2gm20f seems to have more power than my A-4 did YMMV ROB _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
