My 26' uses a Yanmar Diesel 8HP.. On Thu, Jan 29, 2015 at 10:42 AM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote:
> + 1 > > A 30 HP diesel is HUGE for a 29 foot boat. > > An A4 powered 29 would have the 1:1 tranny, so depending on the prop you > would have between about 15 and 25 HP available. > > > > *Joe Della Barba* > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Robert > Gallagher via CnC-List > *Sent:* Thursday, January 29, 2015 12:21 PM > *To:* cnc-list@cnc-list.com > *Subject:* Re: Stus-List Universal M4-30 (Eric Baumes) > > > > I have to ask the question: will it fit in the hole? > > > > That's a lot of engine for a 29ft boat. The A-4 only put out About 18hp at > the RPM that it probably generated pushing your boat. > > > > My yanmar 2gm20f seems to have more power than my A-4 did > > > > YMMV > > ROB > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
