My 26 had a Vires. I still have it sitting around if anyone wants it for spare
parts and wants to arrange for pick.
John
On Thursday, January 29, 2015 1:46 PM, Dan Utinske via CnC-List
<cnc-list@cnc-list.com> wrote:
My 26' uses a Yanmar Diesel 8HP..
On Thu, Jan 29, 2015 at 10:42 AM, Della Barba, Joe via CnC-List
<cnc-list@cnc-list.com> wrote:
+ 1A 30 HP diesel is HUGE for a 29 foot boat.An A4 powered 29 would have the
1:1 tranny, so depending on the prop you would have between about 15 and 25 HP
available. Joe Della Barba From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Robert Gallagher via CnC-List
Sent: Thursday, January 29, 2015 12:21 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Universal M4-30 (Eric Baumes) I have to ask the
question: will it fit in the hole? That's a lot of engine for a 29ft boat. The
A-4 only put out About 18hp at the RPM that it probably generated pushing your
boat. My yanmar 2gm20f seems to have more power than my A-4 did YMMVROB
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
