Just as long as your garage door doesn’t close and open on your car when you 
key your mike .... remember the TV commercial for insurance with the unknown 
wall switch?

Peter Fell
Sidney, BC
Cygnet
C&C 27 MkIII

From: Rich Knowles via CnC-List 
Sent: Tuesday, September 09, 2014 5:12 PM
To: D Harben ; cnc-list@cnc-list.com 
Subject: Re: Stus-List Stereo finally works

When I key up my handheld in my home office, my paper shredder starts. 

Rich

On Sep 9, 2014, at 21:02, D Harben via CnC-List <cnc-list@cnc-list.com> wrote:


  .... the handheld VHF on my PDF totally causes my tiller pilot to have a 
meltdown, as well as the bulkhead compass.... 

  Don




  On Sep 9, 2014, at 10:04 AM, Jack Fitzgerald via CnC-List 
<cnc-list@cnc-list.com> wrote:


    Keep in mind the interference that the magnets in speakers may place on 
your steering compass. I have noticed that my hand held VHF radio will cause 
the compass Honey's to swing when within about a foot of the compass 

    Jack Fitzgerald
    C&C 39 TM
    HONEY
    US12788




    On Tue, Sep 9, 2014 at 8:55 AM, Joel Aronson via CnC-List 
<cnc-list@cnc-list.com> wrote:

      I'm thinking of mounting the new speakers in the inspection port covers 
in the transom.  I hate cutting holes in my boat!  I'll wait for the Defender 
sale to shop for speakers, but I rarely sail with the stereo on, so I'm not 
looking to spend big bucks. 

      Joel

      On Mon, Sep 8, 2014 at 8:17 PM, Rich Knowles via CnC-List 
<cnc-list@cnc-list.com> wrote:

        8 or 4 ohms will make very little difference in sonic performance. The 
amps' outputs are much lower impedance so the speakers are in a bridging 
configuration. 

        Rich

        On Sep 8, 2014, at 19:50, Sylvain Laplante via CnC-List 
<cnc-list@cnc-list.com> wrote:




          One thing to remember is that most boat audio systems are 4 ohms and 
it is better to use speakers with same impedance ( 8 ohm will take too much 
juice ). 
          Sometimes you only discover it after everything is installed :-)

          Sylvain
          C&C27MkIII


----------------------------------------------------------------------
          From: Joel Aronson via CnC-List <cnc-list@cnc-list.com>
          To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> 
          Sent: Monday, September 8, 2014 6:25 PM
          Subject: Stus-List Stereo finally works


          After three years my stereo is fully functional.  I replaced the old 
stereo with a Sony unit after I bought the boat.  One of the 2 interior 
speakers worked and the 2 cheapo West cockpit speakers worked.  
          After spending way too much time, I finally figured out that the 
speaker wire was to corroded to carry a signal.  Initially, I replaced most of 
the wire with household wire.  DON"T USE HOUSEHOLD SPEAKER WIRE.  That lasted 
about a season.  I finally replaced all of the wire with marine grade wire.  
Then I discovered that the rubber around the speaker cones disintegrated. I 
bought 5 1/4 inch car speakers that fit into the enclosures for the cabin 
speakers, and then found out the cockpit speakers did't work.  Turns out 
someone twisted and taped the connections.  New crimp connectors fixed them.  

          Finally, 4 working speakers!
          Now, need to upgrade the cockpit speakers.  

          Joel
          35/3
          The Office
          Annapolis


          -- 
          Joel 
          301 541 8551


          _______________________________________________
          This List is provided by the C&C Photo Album

          Email address:
          CnC-List@cnc-list.com
          To change your list preferences, including unsubscribing -- go bottom 
of page at:
          http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




          _______________________________________________
          This List is provided by the C&C Photo Album

          Email address:
          CnC-List@cnc-list.com
          To change your list preferences, including unsubscribing -- go bottom 
of page at:
          http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



        _______________________________________________
        This List is provided by the C&C Photo Album

        Email address:
        CnC-List@cnc-list.com
        To change your list preferences, including unsubscribing -- go bottom 
of page at:
        http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com







      -- 
      Joel 
      301 541 8551 

      _______________________________________________
      This List is provided by the C&C Photo Album

      Email address:
      CnC-List@cnc-list.com
      To change your list preferences, including unsubscribing -- go bottom of 
page at:
      http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




    _______________________________________________
    This List is provided by the C&C Photo Album

    Email address:
    CnC-List@cnc-list.com
    To change your list preferences, including unsubscribing -- go bottom of 
page at:
    http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


  _______________________________________________
  This List is provided by the C&C Photo Album

  Email address:
  CnC-List@cnc-list.com
  To change your list preferences, including unsubscribing -- go bottom of page 
at:
  http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




--------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to