I have PolyPlanar speakers in Touche's cockpit.  10+ years and still going
strong.  I hit them with ArmorAll every spring for UV protection.

Dennis C
On Sep 9, 2014 6:18 AM, "Gary Nylander via CnC-List" <cnc-list@cnc-list.com>
wrote:

>   I did the same - two different set of 'marine' speakers lasted about a
> year each before they disintegrated. Now, I have some neat starboard covers
> for where they used to be - the inside ones are OK. I guess I never really
> wanted outside noise.
>
> Gary
>
> ----- Original Message -----
> *From:* dwight via CnC-List <cnc-list@cnc-list.com>
> *To:* 'Joel Aronson' <joel.aron...@gmail.com> ; cnc-list@cnc-list.com
> *Sent:* Tuesday, September 09, 2014 9:03 AM
> *Subject:* Re: Stus-List Stereo finally works
>
>  Joel
>
>
>
> I cut holes to put so-called weatherproof cockpit speakers on Alianna,
> wish I had not done that.  We hardly ever used them and now one has a bad
> crackle noise already…I suggest spending that extra money on better cabin
> speakers… I just disconnected my cockpit speakers so now they look like air
> vents
>
>
>
> Dwight Veinot
>
> C&C 35MKII, Alianna
>
> Head of St. Margaret's Bay, NS
>
>
>  ------------------------------
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* September 9, 2014 9:55 AM
> *To:* Rich Knowles; cnc-list@cnc-list.com
> *Subject:* Re: Stus-List Stereo finally works
>
>
>
> I'm thinking of mounting the new speakers in the inspection port covers in
> the transom.  I hate cutting holes in my boat!  I'll wait for the Defender
> sale to shop for speakers, but I rarely sail with the stereo on, so I'm not
> looking to spend big bucks.
>
>
>
> Joel
>
>
>
> On Mon, Sep 8, 2014 at 8:17 PM, Rich Knowles via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> 8 or 4 ohms will make very little difference in sonic performance. The
> amps' outputs are much lower impedance so the speakers are in a bridging
> configuration.
>
> Rich
>
>
> On Sep 8, 2014, at 19:50, Sylvain Laplante via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>
>
> One thing to remember is that most boat audio systems are 4 ohms and it is
> better to use speakers with same impedance ( 8 ohm will take too much juice
> ).
>
> Sometimes you only discover it after everything is installed :-)
>
>
>
> Sylvain
>
> C&C27MkIII
>
>
>   ------------------------------
>
> *From:* Joel Aronson via CnC-List <cnc-list@cnc-list.com>
> *To:* "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
> *Sent:* Monday, September 8, 2014 6:25 PM
> *Subject:* Stus-List Stereo finally works
>
>
>
> After three years my stereo is fully functional.  I replaced the old
> stereo with a Sony unit after I bought the boat.  One of the 2 interior
> speakers worked and the 2 cheapo West cockpit speakers worked.
>
> After spending way too much time, I finally figured out that the speaker
> wire was to corroded to carry a signal.  Initially, I replaced most of the
> wire with household wire.  DON"T USE HOUSEHOLD SPEAKER WIRE.  That lasted
> about a season.  I finally replaced all of the wire with marine grade wire.
>  Then I discovered that the rubber around the speaker cones disintegrated.
> I bought 5 1/4 inch car speakers that fit into the enclosures for the cabin
> speakers, and then found out the cockpit speakers did't work.  Turns out
> someone twisted and taped the connections.  New crimp connectors fixed
> them.
>
>
>
> Finally, 4 working speakers!
>
> Now, need to upgrade the cockpit speakers.
>
>
>
> Joel
>
> 35/3
>
> The Office
>
> Annapolis
>
>
>
> --
> Joel
> 301 541 8551
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of
> page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>   _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of
> page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of
> page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
>
>
> --
> Joel
> 301 541 8551
>  ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4015/8146 - Release Date: 09/03/14
>
> ------------------------------
>
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of
> page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of
> page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page 
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to