Here's a few videos for any attempting core repairs. Techniques vary. Your exact technique will depend on your situation.
https://www.youtube.com/watch?v=JAtjHjJhBV0 https://www.youtube.com/watch?v=RVViKMbvjDI https://www.youtube.com/watch?v=yFpsncEt8SY https://www.youtube.com/watch?v=6lEb2NoQnSo (I don't like their technique on this one.) https://www.youtube.com/watch?v=6lEb2NoQnSo Enter various combinations of "wet deck rotten core replacement" for other videos. Don't assume any video shows proper techniques. There are lots of ways to replace core. I've done 3 or 4 deck peels (Thankfully, none on Touche'). For a deck peel, I use a Dremel MultiMax for a very narrow cut. I try to cut the deck a bit outside the presumed rotten area. Remove the rotten core leaving an inch or so inside the cut. This will give you a sill to replace the cutout piece so it matches the elevation of deck. This is why I don't like the 4th video above. That technique puts the new core under the old deck. Dennis C. Touche' 35-1 #83 Mandeville, LA
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com