Just making sure - those are two different 12 volt lines.
On Wed, Apr 16, 2014 at 1:15 PM, Danny Haughey <djhaug...@juno.com> wrote: > Definitely getting power to the computer... The control head powers on. > > Danny > > > ---------- Original Message ---------- > From: Joel Aronson <joel.aron...@gmail.com> > To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com> > Subject: Re: Stus-List AutoPilot Issues > Date: Wed, 16 Apr 2014 12:17:44 -0400 > > Is the computer getting power? Put a volt meter on the connection. Then > check connections between the computer and control head. > > Joel > > On Wednesday, April 16, 2014, Danny Haughey <djhaug...@juno.com> wrote: > >> My mistake.... Going from memory I was remembering running a wire from >> the through hull fitting for the new depth sounder to the box for the >> TackTick system. >> The fluxgate does indeed go directly to the computer... >> >> >> ---------- Original Message ---------- >> From: Frederick G Street <f...@postaudio.net> >> To: cnc-list@cnc-list.com >> Subject: Re: Stus-List AutoPilot Issues >> Date: Wed, 16 Apr 2014 10:02:04 -0500 >> >> To amplify a bit: there *IS* a SeaTalkNG connection on the X5 course >> computer; but as far as I know, it�s only to get onto the backbone for >> other data. I�m not sure you can run the X5 with only a SeaTalkNG control >> head. The fluxgate compass and rudder reference transducer connect right >> to the X5 course computer, along with the drive unit. >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( >> >> >> On Apr 16, 2014, at 9:57 AM, Frederick G Street <f...@postaudio.net> >> wrote: >> >> Danny � have you gone carefully through the install manual and checked >> everything in your system? >> >> The X5 is a SeaTalk-based system, and used to ship with the ST6002 >> control head; the p70 is SeaTalkNG, which is a completely different >> communication system than SeaTalk. Do you have a SeaTalk-to-NG converter >> somewhere in the system? >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( >> >> On Apr 16, 2014, at 9:51 AM, Joel Aronson <joel.aron...@gmail.com> wrote: >> >> Danny, >> >> Not in my manual! It connects tot he computer. >> >> >> On Wed, Apr 16, 2014 at 10:20 AM, Danny Haughey <djhaug...@juno.com> >> wrote: >> >>> Hi Joel, >>> >>> The fluxgate compass connects to another box that connects back to the >>> computer. >>> >>> I'll have to register it then!!! Thanks for the tip! >>> >>> >>> Danny >>> Lolita >>> 1973 Viking 33 >>> Westport Point, MA >>> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> >> >> >> ____________________________________________________________ >> *Do THIS before eating carbs (every time)* >> 1 EASY tip to increase fat-burning, lower blood sugar & decrease fat >> storage >> <http://thirdpartyoffers.juno.com/TGL3142/534ea5ab3c4e125ab3db4st02vuc> >> info.fixyourbloodsugar.com<http://thirdpartyoffers.juno.com/TGL3142/534ea5ab3c4e125ab3db4st02vuc> >> > > > -- > Joel > 301 541 8551 > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
