Barbara For summer and winter Charleston temp I recommend SCS 2000 , GE SILPRUF . I seald hatches once with Sicaflex 295, sicaflex primer. AFTER ONE SEASON AGAIN PROBLEM and even small crack in lens. Plexi elongation is significant. Annapolis local workshop recommended Ge silpruf. Sikaflex flexibility does not much plexi. Sikaflex works fine with glass. Since few years no problems. For frames cleaning use only rubbing alkohol. Good luck Frank Landfall 38
Sent from my iPhone > On Apr 14, 2014, at 11:31 AM, "McNamee, Michael" <michael.mcna...@itron.com> > wrote: > > I just removed and resealed the skylight in my C&C30 MK II this past summer > with Sikaflex, and yes you must use their primer. But make sure you wear > rubber gloves and protect everything from spillage or else you will have > black stuff EVERYWHERE that doesn't come off. My hands had traces of that > stuff for weeks. It's like India Ink. > Mike > > -----Original Message----- > From: Fair, Mike [mailto:mike.f...@mckesson.com] > Sent: Monday, April 14, 2014 6:09 AM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Sealant or adhesive? > > You MUST use the Primer if you use UV295 > > -Mike > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > blhick...@yahoo.com > Sent: Monday, April 14, 2014 8:38 AM > To: cnc-list@cnc-list.com > Subject: Stus-List Sealant or adhesive? > > Hi Listers, > Ok so I'm replacing the cast acrylic lens in the forward hatch. Is Sikaflex > 295UV the way to go to rebed the lens? I got new hatch and handle gaskets > from Atkins and Hoyle and sprang for "their" caulk stuff for the big hatch > gasket. I see from the Jamestown Dist. website that if using the Sikaflex > 295, Sikaflex recommends using their primer at 4x the cost of a tube of > Sikaflex. Can I use alcohol or acetone or anything else that doesn't cost $83 > for one small job to wipe the hatch clean? Are "spacers" required when I'm > placing the new acrylic lens back in? Thanks for any help. (I looked for > help on another site but not too helpful, suggested silicone or Dow Corning > 795. ). Thx, > > Barbara Hickson Fellers > "Flight Risk" > '76 C&C 33 > Charleston, SC > > > _______________________________________________ > This List is provided by the C&C Photo Album http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
