I just removed and resealed the skylight in my C&C30 MK II this past summer 
with Sikaflex, and yes you must use their primer.  But make sure you wear 
rubber gloves and protect everything from spillage or else you will have black 
stuff EVERYWHERE that doesn't come off.  My hands had traces of that stuff for 
weeks.  It's like India Ink.
Mike

-----Original Message-----
From: Fair, Mike [mailto:mike.f...@mckesson.com] 
Sent: Monday, April 14, 2014 6:09 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Sealant or adhesive?

You MUST use the Primer if you use UV295

-Mike

-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of 
blhick...@yahoo.com
Sent: Monday, April 14, 2014 8:38 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Sealant or adhesive?

Hi Listers,
  Ok so I'm replacing the cast acrylic lens in the forward hatch. Is Sikaflex 
295UV the way to go to rebed the lens?  I got new hatch and handle gaskets from 
Atkins and Hoyle and sprang for "their" caulk stuff for the big hatch gasket. I 
see from the Jamestown Dist. website that if using the Sikaflex 295, Sikaflex 
recommends using their primer at 4x the cost of a tube of Sikaflex. Can I use 
alcohol or acetone or anything else that doesn't cost $83 for one small job to 
wipe the hatch clean?  Are "spacers" required when I'm placing the new acrylic 
lens back in?  Thanks for any help. (I looked for help on another site but not 
too helpful, suggested silicone or Dow Corning 795. ). Thx,

Barbara Hickson Fellers
"Flight Risk"
'76 C&C 33
Charleston, SC


_______________________________________________
This List is provided by the C&C Photo Album http://www.cncphotoalbum.com 
CnC-List@cnc-list.com



_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to