Sean What is centek muffler model? I welded ss and i expect some problem in future. Thanks Frank
Sent from my iPhone > On Apr 13, 2014, at 9:06 PM, "John and Maryann Read" <johnpr...@comcast.net> > wrote: > > Sean > > Our 34 came OEM with a 3GM30. Still running strong after all these years J > The exhaust from engine to muffler is 2 inch. From muffler to transom is 1.5 > inch. We just this year replaced the original stainless muffler which was > leaking with a fiberglass model from Centek. Was a direct replacement no > modifications needed > > Cheers > > John and Maryann > Legacy III > 1982 C&C 34 > Noank, CT > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of > conner.s...@comcast.net > Sent: Sunday, April 13, 2014 1:47 PM > To: cnc-list@cnc-list.com > Subject: Stus-List 3GM30F exhaust specs... > > I'm in the process of swapping out and old 2QM20H (still running strong--just > had the chance to acquire an GM) with a 3GM30F. The 3GM has 2" exhaust > which I assume is OEM specs (none of the manuals specify exactly). But I > was thinking I could adapt to my existing 1.5" exhaust system and avoid the > hassle of replacing wet muffler and 10' of hose.. > > I think I found a post or two where this was done.. does anyone have > experience with this or strong caution against? > Thanks > > ps. will try and post some specs on fit as I build the mock engine and > figure out dimensions, etc; > > > > > This email is free from viruses and malware because avast! Antivirus > protection is active. > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
