Fred, and others... I located the fitting on my boat and it appears to rusted..I'm almost afraid to touch it as it seems it might fall off, any thoughts on what I should do? Thanks
Richard 1985 37 CB Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -----Original Message----- From: Frederick G Street <f...@postaudio.net> To: Daniel Sheer <dansh...@yahoo.com> Cc: cnc-list <cnc-list@cnc-list.com> Sent: Wed, Apr 9, 2014 12:27 pm Subject: Re: Stus-List LF38 rudder post grease fitting I just use a good waterproof grease like Lubriplate. Seems to work just fine. And probably a good idea to keep these discussion “on-list” so others can chime in, as well. I’m CC’ing the list. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Apr 9, 2014, at 11:11 AM, Daniel Sheer <dansh...@yahoo.com> wrote: Fred, Do you know if the bushing is metal or plastic? Trying to figure out what kind of grease to use. Thanks Dan On Tuesday, April 8, 2014 9:39 PM, Daniel Sheer <dansh...@yahoo.com> wrote: Thanks Fred. On Tuesday, April 8, 2014 10:36 AM, Frederick G Street <f...@postaudio.net> wrote: Mine (hull #009, 1979) has a zerc fitting more or less on the starboard side and aft; difficult to see, and harder to reach. Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( On Apr 7, 2014, at 8:38 PM, Daniel Sheer <dansh...@yahoo.com> wrote: Anybody know if the LF38 has a grease fitting on the rudder post, and if so, where it is? Dan Sheer Pegathy LF38 Rock Creek off the Patapsco _______________________________________________ his List is provided by the C&C Photo Album ttp://www.cncphotoalbum.com nc-l...@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
