Chuck, that is one gigantic wheel for a 36 foot boat. How do you like it for every day sailing?
_____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S Sent: April 3, 2014 9:25 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List boot stripe Not to be a wise guy, but prep is determined by which paint you choose. Instructions on the can. It will mention removing any old paint or tape first, and sanding to create a mechanical bond. I painted mine w Interlux Brightside Boot Stripe paint. It's easy to use, one part, easy to touch up when scarred by a dock or whatever. I remember I had to sand w course paper before the first coat and 320 between coats. I later added stripes above using vinyl tape. It matched exactly and was much easier. You clean the surface and apply the tape. When it's done, it is done, no worrying about rain or waiting for it to dry, no runs. The picture shows the boat after haulout at end of one season. The cove stripe is vinyl tape also. https://www.flickr.com/photos/119825754@N05/13049265653/ _____
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
