As most screws get 'screwed' up - no pun intended' , I would vote for the
Robertson head screws in stainless, and an electric screwdriver.
Gary
----- Original Message -----
From: RAYMOND SHIBE
To: cnc-list@cnc-list.com
Sent: Wednesday, March 26, 2014 1:31 PM
Subject: Re: Stus-List floor board fasteners
For the price of the PYC fasteners you could buy a battery powered
drill/screw driver and simply use regular screws. My near future plans are to
use "T" nuts from McMaster and Carr as the threads in the anchor
points for my floor boards are no longer viable.
Ray Shibe
On Wed, Mar 26, 2014 at 11:13 AM, wwadjo...@aol.com wrote:
I am redoing my cabin floorboards. Previous owner had them screwed down.
Very difficult to remove for inspection.
Anyone have link/suggestion for other options for securing with better
access? I thought I had saved a similar question but can't find it.
Bill Walker
Evening Star
CnC 36
Pentwater, Mi.
------------------------------------------------------------------------------
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
