It should work as far as I know. No way to legally copy it. Rich
> On Feb 20, 2014, at 15:16, "dwight" <dwight...@gmail.com> wrote: > > Rich > > Do you know if the C-Map NT card I use in my CP190c will work in the CP190i? > > If it does work, do you know of any way that I could make a copy of the card > I already have? I would like to have both units up and going at the same > time but I would prefer not to have to by a new C-Map card > > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich > Knowles > Sent: February 20, 2014 12:55 PM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Navigation Software > > Here's the info on the SH 190i. > > The unit is available with or without a base map and both versions accept > c-map cards. > > The base map gives detailed depths up to around 30'. In deeper water there > are no depths shown on the screen. If you want more detailed information > about ports, deeper depths and marks etc. , you will need an appropriate > c-map cartridge of the area you need up to a card for all of North America > and environs. Prices vary accordingly. > > The Binnacle typically does not advertise electronics on their US website as > selling cross-border can be a hassle for all parties. Prices and details are > on the Canadian web site. Hope this clears up the mystery. > > Regardless where you buy it, the CP190i is a great plotter. > > Rich > > > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
