So in the spirit of Christmas....

I've got two boxes of stuff for St60 instruments that I've collected over the 
past 10 years or so. All of it is new and unused.  New boat has all B&G.  Free 
to good home for shipping cost or in exchange for B&G parts...  Priority goes 
to folks who will pick up on Long Island (NY)

St60 speed transducer w/cable, also plug, nut & rubber washer
St60 depth transducer w/cable - missing nut, no washer
Various instrument head foam gaskets (gaskets only, sorry, no free... )
Various cables (nothing fancy)
Masthead vane service kit - missing cups, just the tail piece

And the big item - a brand new full masthead vane unit with all parts and cable 
(would ask for a donation to a charity to be named privately).  You will need 
your own male mast mount.

Of course, if you want to pay me for them that's fine too, I just have no 
patience for eBay anymore.  10% additional charge if your boat is named 
Enterprise.  No guarantees any of it works (but is should)

John

Sent from my iPad

> On Dec 20, 2013, at 2:44 PM, Tim Goodyear <timg...@gmail.com> wrote:
> 
> Dave,
>  
> The area where my tranducers are installed (under the v-berth, aft of the 
> holding tank) is not cored.  I found that the area under the galley sink is 
> also not cored (where the sink drains are), but that's no good to you for a 
> transducer.
>  
> Tim
> Mojito
> C&C 35-3
> Branford, CT
> 
>> On Fri, Dec 20, 2013 at 9:02 AM, David Jacobs <davidjaco...@comcast.net> 
>> wrote:
>> Joel,
>> 
>>  
>> 
>> Is there any place on a 35 MK III, near the centerline that isn’t cored and 
>> might be a good location for a in hull sensor?
>> 
>>  
>> 
>> Dave
>> 
>> Saltaire
>> 
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to